No, but if I could find say 10 or so of the 40mm casings plus a 105, I'd make one hell of a manly windchime.
Turn down the 40mm casings to separate lengths, drill out primer housing area completely so you can look out the mouth of the casing from the rim's face.
Cut the 105 brass off just shy of the rim.
Take the brass tube, split and slightly spread into 10 sections, cut off 3" of each "finger" you just made.
Spot weld all the parts so you make an umbrella shape with all the brass fingers, using the removed sections as spreaders at the ends.
Drill 20 holes, 1 at each finger end and one at the top lip of the brass casing tube.
Make 11 pieces of plastic coated cable, each about 3' long.
Rim and primer shaft becomes the "striker" with one cable routed through the primer shaft and crimped onto itself. Cable runs up through the center of the brass tube. Remaining 10 cables are routed through the 2 sets of holes in a spoke type pattern, through the drilled primer pockets of the 40mm brass, then crimp something heavy on the ends that will stay there when the 40mm casing is resting on it.
Crimp all 11 together onto a hook of some sort to hang it up. Tada, the windchime of death. LOL
Turn down the 40mm casings to separate lengths, drill out primer housing area completely so you can look out the mouth of the casing from the rim's face.
Cut the 105 brass off just shy of the rim.
Take the brass tube, split and slightly spread into 10 sections, cut off 3" of each "finger" you just made.
Spot weld all the parts so you make an umbrella shape with all the brass fingers, using the removed sections as spreaders at the ends.
Drill 20 holes, 1 at each finger end and one at the top lip of the brass casing tube.
Make 11 pieces of plastic coated cable, each about 3' long.
Rim and primer shaft becomes the "striker" with one cable routed through the primer shaft and crimped onto itself. Cable runs up through the center of the brass tube. Remaining 10 cables are routed through the 2 sets of holes in a spoke type pattern, through the drilled primer pockets of the 40mm brass, then crimp something heavy on the ends that will stay there when the 40mm casing is resting on it.
Crimp all 11 together onto a hook of some sort to hang it up. Tada, the windchime of death. LOL