Tisas C45 (.45 ACP)

Gypsy

Gypsy

SSSO 1&2/Plank Owner
Member
Joined
Sep 13, 2006
Messages
3,640
Location
Red dot in a blue state
Anyone have any info it by chance? My brother found one, said it feels like it was made for his hand. All he can find out is that it is Turkish and most likely used by their Military or LEO... He's just wondering if anyone has used it, any quirks etc?
 
It looks VERY similar to a CZ-75. I have a CZ chambered in 9mm that I shoot in production from time to time. Nice running gun, very easy on the wallet, and you can really customize the hell out of them.

Nice guns... but I'm a Glock man. :)
 
Gypsy, also check these out:
Typical price:
http://www.jgsales.com/product_info.php/p/tisas-zigana-c45-4-625in-barrel-new/products_id/2108

I think related history:
http://en.wikipedia.org/wiki/IWI_Jericho

If your brother's still looking..have him look at the Baby Eagle Polymer also.
Looks like same basic frame as Tisas, and fit's MY hand the same way..nice!
Almost feels like a Browning HiPower..which is to say it typically fits a smaller hand well.
I was very close to buying a Polymer Baby Eagle, when I found my Browning (.40).

Gypsy, also here's one of my favorite sites for researching typical market prices (can "search" for ANY gun):
http://www.gunsamerica.com/Search.aspx?T=baby+eagle
 
That Zigana Sport is a nice looking pistol and looks to be a ported speed gun...

Thanks for that site....might be my next pistol..;)
 
Gracias all. :) His heart seems set on the Tisas, "made perfectly for my hand"...but I'll pass all this along. His main question was if anyone had shot it and if so was it without major glitches etc. But I'll send him all the links or tell him to just join and read them himself. LOL.
 
Sorry Gypsy!
:doh:
Got a little over-passionate! Can't help with the specifics, just the research.

I Did want to show you(him) that $359 price though, and say it LOOKS nice, and it's a lot like the CZ/Jericho which are well-respected platforms! For the price, you've got me interested too!!!

He may be able to pic Jim's brains about it at:
J&G Sales, 440 Miller Valley Road, Prescott, AZ, 86301
Phone:928-445-9650, Fax:928-445-9658
Email: info@jgsales.com or better: gunsmith@jgsales.com <gunsmith@jgsales.com>
I called to check, but they were closed.

They're kinda unknown, and probably hard to find anyone with experience..I can't even find a review on it.
But I think they share a family history with CZ and Jericho (Tanfoglio based designs)...which are respected.

Sorry about the over-kill/non-specifics though!
:)
 
7point62 said:
Kimber.
Click to expand...
Agree, except Kimber w/mods of flat mainspring housing, short trigger, etc.
("made perfectly for my hand"...) may be WAY out of his price range.

$359 for a Tanfoglio based design (if it is) is damn good...if the QC is also ISO9001, like they say it is. It's a pretty nice looking little rig!
ts.jpg


Course, I wish it had the 1911 style safety, and it would need some thin black grips!
(10+1 of .45acp!)
 
arizonaguide, don't apologize...you were great and I appreciate all the info! I passed along your latest and he said to give you a big thanks. :)
 
He will get what he pays for...How much do extra mags cost, new sights etc. I personally would stay with a well know name. Glock, Sig, FN, HK, etc All my Glocks where out of the box nail drivers.
 
Polar Bear said:
He will get what he pays for...How much do extra mags cost, new sights etc. I personally would stay with a well know name. Glock, Sig, FN, HK, etc All my Glocks where out of the box nail drivers.
Click to expand...

I agree. I looked around online for any reviews and couldn't find any. Maybe I didn't look hard enough, but apperently this is a newer company and just started selling in the US. Personally I would feel more comfortable spending a liitle bit more money for a proven handgun.
 
The safety blows it for me cuz it's OPPOSITE the BrowningHP (1911 style), and if I got used to one it would be opposite the other...I'd be always throwing one to "safe" under stress. And, yup, you can find Glocks for that same price range.

But, If it's like the Jericho, it sure had a sweet "natural point", though...and there's something to be said for "fit".
(same "opposite safety" on the Jericho/Baby Eagle though...crap!)

"Fit" was the problem with Glocks/Sigs for me...they just felt like a "block" in my hands (no natural point, for me).

So, I have to sit out the Polymer craze, and stick with my Browning HP (or a 1911 w/flat mainspring housing/short trigger).
The M&P is the closest to "fit" in something modern/reputable...but still not as good "fit"(for me)as BrowningHP (which will reliably chew up ALL shapes and sizes (.40SW) without hesitation or hickup!).
 
arizonaguide said:
The safety blows it for me cuz it's OPPOSITE the BrowningHP (1911 style), and if I got used to one it would be opposite the other...I'd be always throwing one to "safe" under stress. And, yup, you can find Glocks for that same price range.

But, If it's like the Jericho, it sure had a sweet "natural point", though...and there's something to be said for "fit".
(same "opposite safety" on the Jericho/Baby Eagle though...crap!)

"Fit" was the problem with Glocks/Sigs for me...they just felt like a "block" in my hands (no natural point, for me).

So, I have to sit out the Polymer craze, and stick with my Browning HP (or a 1911 w/flat mainspring housing/short trigger).
The M&P is the closest to "fit" in something modern/reputable...but still not as good (for me)as BrHP.
Click to expand...

So what you are saying is you have hands like a women:)
 
Yeah, dammit...pretty much! (although more like small fat little sausages (my FINGERS, dammit!))!
And you don't know how much that pisses me off when I see the new XDm or such, and they JUST don't feel right!

Whaaaaaaaaa!
:doh:

I actually started looking into making my own CNC polymer lower assembly(engineering geek) for the BHP, and I guess there IS one for the 1911. Tooo much work/trouble.
 
That's what my Buddy keeps telling me PB!
(please don't reinforce his attempts to "corrupt" me...Dammit, I can't AFFORD it right now!..I've got myself very convinced I like my BHP!) He loves his Sig, but also had to get an XDm, M&P, freakin Glock, Rem870, my old Mod 10(.38), etc. etc. ,AR-15,etc. (he's an ahole!)
:D
Plus, I've got it in my mind to get something Carbine-like!!! (and prefer 7.62NATO!($$$))
or maybe that Marlin 45-70 Alaskan Bush gun! (something good for Photo trips, Border S&R!)
:P
 

Similar threads

T
Group 35 Series Training Opportunities
Replies
1
Views
216
Marauder06
Marauder06
ni.ks9041990
VHP (Veterans History Project)
Replies
0
Views
91
ni.ks9041990
ni.ks9041990
AWP
Review Death Waits in the Dark by Greg Coker/ George Hand IV
Replies
3
Views
614
Kaldak
Kaldak
WaffleHouseFan
Medically rejected by AFSW, hoping to get 18X
Replies
18
Views
2K
WaffleHouseFan
WaffleHouseFan
N1TLOTL
  • Locked
I need help on my project
Replies
12
Views
1K
Ooh-Rah
Ooh-Rah
Back
Top